How do you use POXILINA 10 MIN.?

POXILINA 10 MIN. is a two-component epoxy putty ideal for sealing, filling, rebuilding, repairing and joining pipes made of all types of materials, such as iron, bronze, PVC and lead. It also adheres to ceramic, glass, cement and wood.

It is easy to prepare and use. Components A and B are supplied in a single wrapper. Cut off the required amount and knead for two minutes until you obtain a uniformly coloured mass, then apply it as putty to the surface to be repaired.

Make sure that the surfaces to which you apply POXILINA 10 MIN. are clean, dry and free of grease and rust. Before applying the product, remember to sand thoroughly around the area to be repaired and clean it with alcohol.

Do not subject the joint to stress for 1 hour to allow it to dry completely.

To repair a pipe, you must shut off the liquid supply valve, dry the area to be repaired and then apply POXILINA. Before applying the product, remember to sand thoroughly around the area to be repaired and clean it with alcohol.

If you want to seal a hole, better results are achieved by making the product penetrate it.

Once the repair is complete, do not forget to wash your hands with plenty of soap and water.