How do you use FASTIX EXTERIOR?

FASTIX EXTERIOR is a sealant for repairs on the exterior of the home. It is ideal for sealing joints that will remain unchanged over time.

Before use, make sure that the surfaces to be sealed are clean, dry, and free of grease or rust.

For a neat application, protect the area around the joints with masking tape. To seal, move the tube or cartridge forward until the desired thickness is achieved. Once you have finished using the product, clean the tube nozzle with a dry piece of paper or cloth before replacing the cap.

If you used the cartridge presentation, leave a slight excess of material above the nozzle to prevent it from curing inside the cartridge. Remove the excess product before using it again.

Recommendations:

We advise against subjecting the joint made with FASTIX EXTERIOR to significant stress before 24 hours have passed.

Before FASTIX EXTERIOR dries, it can be easily cleaned with gasoline or mineral spirits.

To neaten the edges, cut away the excess product once it is dry.

For good filling, smoothing the application is recommended. This can be done with an ice cube and/or a spatula.

WARNING: The use of cutting tools and/or solvents to remove stains must be carried out taking all the safety measures and precautions indicated for the use of such items.