How do you use EL PULPITO?

Due to its consistency and excellent initial grip, EL PULPITO is the ideal adhesive for attaching objects to the wall.

EL PULPITO can be used to attach baseboards, tiles, ceramic tiles, wood, Telgopor mouldings, Corlok, machimbre, cable channels, small signs and plastics (except polyethylene, polypropylene, flexible PVC and Teflon).

1. Make sure that at least one of the surfaces to be joined is absorbent/porous (to determine whether a surface is porous/absorbent, pour a drop of water onto it. If it absorbs the liquid, it is a porous/absorbent surface. Otherwise, it is not). Make sure that both surfaces are firm and clean.
2. Apply EL PULPITO generously to one of the surfaces to be joined. It can be applied in dots to irregular surfaces, in waves to wide surfaces and in lines to narrow surfaces.
3. Position the item to be attached and press firmly. Immediately remove any adhesive residue with a damp cloth.

Important:

EL PULPITO completes its drying process in 24 hours. If you subject the bond to stress before this period has elapsed, the application may not be effective.

To attach heavy objects, you must use temporary support until EL PULPITO has dried completely.

Pay particular attention to the firmness of the surfaces. In the case of walls with structural problems or paint in poor condition, the application may encounter difficulties resulting from these poor conditions.