How do you use POXIPOL 10 MIN.?

POXIPOL 10 MIN. is a two-component adhesive that is easy to prepare and use.

Before use, make sure the surfaces to be bonded are clean, dry, and free of grease or rust. Sanding very smooth or glossy surfaces is recommended.

1. Dispense equal parts of each component. Make sure to apply a bead of at least 2 cm of each component.
2. Mix for approximately one minute at a minimum, until you obtain a uniform colour.
3. Apply the mixture to one of the surfaces to be bonded and keep the parts held together for 10 minutes.

The product hardens in just 10 minutes, but reaches its maximum strength after 24 hours.