How can I bond an aluminium profile to a marble countertop?

We recommend using Poxipol Slow-Setting.

Before using it, make sure the surfaces to be bonded are clean, dry and free of grease or rust. Sanding very smooth or shiny surfaces is recommended.

It is very easy to use. Follow these steps:

1) Dispense equal parts of each component. Make sure to apply a bead of at least 2 cm of each component.

2) Mix for approximately one minute at a minimum, until you obtain a uniform colour.

3) Apply the mixture to one of the surfaces to be bonded and hold the parts together for 10 minutes.

Bear in mind that the product hardens in just 10 minutes, but reaches its maximum strength after 24 hours.