How can I repair the transparent refrigerator tray?

If the refrigerator tray is made of acrylic, we recommend Poxipol Transparente or La Gotita.

Before using either product, make sure that the surfaces to be joined are clean, dry and free of grease or rust. It is recommended to sand very smooth or shiny surfaces.

Using Poxipol is very easy, follow these steps:

1) Dispense equal parts of each component. Make sure to apply a bead of at least 2 cm of each component.

2) Mix for approximately one minute at a minimum, until you obtain a uniform colour.

3) Apply the mixture to one of the surfaces to be joined and hold the parts together for 10 minutes.

Keep in mind that the product hardens in just 10 minutes, but reaches its maximum strength after 24 hours.

If you choose La Gotita, a small amount of product is enough for a surface of approximately 4 cm2. Using an excessive amount of product significantly delays bonding. Remember that the surfaces to be joined must fit together perfectly. 

If the tray is made of polyethylene or polypropylene, we do not have any product