How can I fill holes in wood?

To fill holes in wood, you can use POXIMIX PARA INTERIORES.

When using POXIMIX PARA INTERIORES for household repairs, it is important to keep these three tips in mind to achieve 100% effectiveness.

1. Remove dust and loose parts before applying POXIMIX PARA INTERIORES.
2. It is not necessary to wet the area to be repaired.
3. For mixing, use a spatula and a clean, dry container.

Once the surface is ready and prepared, POXIMIX PARA INTERIORES is prepared as follows: mix 2 (two) parts POXIMIX PARA INTERIORES with 1 (one) part water until you obtain a white, thick paste that is ready to use.

Then apply POXIMIX PARA INTERIORES. The prepared mixture can be worked with for approximately 15 minutes (mixing and applying), and reaches its maximum strength after 24 hours.

We do not recommend using POXIMIX PARA INTERIORES in areas exposed to moisture.

You can also use EL PULPITO for this repair.

How is it used?

1. Make sure that at least one of the surfaces to be joined is absorbent/porous (to determine whether a surface is porous/absorbent, we can pour a drop of water onto it. If it absorbs the liquid, it is a porous/absorbent surface. Otherwise, it is not). Make sure that both surfaces are firm and clean.
2. Apply a generous amount of EL PULPITO to one of the surfaces to be joined. It can be applied in dots to irregular surfaces, in waves to wide surfaces, and in a line to narrow surfaces.
3. Place the item to be attached and press firmly. Immediately remove any adhesive residue with a damp cloth.