Before use, make sure that the surfaces to be joined are clean, dry, and free of grease or rust. Sanding very smooth or shiny surfaces is recommended.
- Measure out equal parts of each component. Be sure to apply a bead of at least 2 centimetres of each component.
- Mix for approximately one minute at a minimum, until an even colour is obtained.
- Apply the mixture to one of the surfaces to be joined and hold the parts together for 10 minutes.
The product hardens in just 10 minutes, but reaches its maximum strength after 24 hours.
You can get it at: https://poxipolstore.com.ar/nuestras-marcas/poxipol/
Comments
0 comments
Please sign in to leave a comment.